Awning Pushout Hardware

Views of installed awning windows

Parrett awnings are available with a variety of pushout hardware configurations, as opposed to more common crankout hardware applications. Typical pushbars and handles/latches are shown below. Based on the size and weight of the awning sash, Parrett can recommend an optimal hardware solution.

Parrett works with a large variety of hardware vendors and can also source custom hardware. The selections below have been time-tested by Parrett to provide optimal performance. For additional pushout awning hardware configurations please view our Rotating Awning page for more information.

Pushout Handle Options

Fig. 20 - A traditional design handle for push out casement windows that uses European multipoint latching mechanisms.

Handle: 3-1/2"
Overall Depth: 1-7/8"
Base Dim.: 3/4" x 2-3/8"

Fig. 21 - Another elegant, traditional design fastener for units not utilizing a multipoint locking gear.

Handle: 3-1/2"
Overall Depth: 1-7/8"
Base Dim.: 11/16" x 2-3/8"

Fig. 22 - Similar function to Fig. 21, with a smaller handle and a unique, aesthetic design.

Handle: 2"
Overall Depth: 1-1/4"
Base Dim.: 11/16" x 2-3/8"

Pushbar Options

Typically a pushout awning with historic pushbars will have a pushbar on each vertical side of the frame that attaches to the vertical sides of the sash.

**Fig. 17** - Slide-bar type adjuster for wood inswing or outswing windows. Based on a traditional pattern, this casement adjuster is designed so as not to interfere with hinged or rolling interior screens whether in the open or closed position. Universal (left or right hand).

Length: 12-1/2"
Overall Height: 2-3/8"
Overall Depth: 1-3/8"

**Fig. 18** - Telescopic friction casement stay is a highly finished version of a pattern common to early 20th century casement windows. It is appropriate for small to medium sized out-swinging sash that are not subject to wind loads.

Length: 10-1/2" or 16"
Overall Height: 1-1/4"
Overall Depth: 1-1/8"

**Fig. 19** - Sliding rod casement adjuster is a highly finished version of a traditional American pattern.

Length: 13-1/2"
Overall Height: 2"
Base dim: 15/16" x 2-3/8"

Pushout Hardware Finishes

The finishes below are available for the hardware shown on this page. Parrett also offers custom plating solutions and other hardware finishes, contact us at info@parrettwindows.com for more information.

Polished Lacquered Brass (PB) - The standard finish for most items.

Polished Unlacquered Brass (PBNL) - This finish, though bright when new, will tarnish quickly through use and exposure, to a natural antique finish.

Oil Rubbed Bronze (OB) - A rich, deep, brown finish, produced by oxidation of the brass metal, and protected by a matte lacquer. Over time the areas of the hardware exposed to wear will become lighter and more polished by use, resulting in the appearance of antique bronze.

Satin Nickel (SN) - This finish is produced by lightly polishing a dull nickel plating with a fine abrasive brush. The result is a clean, functional look, not unlike pewter or brushed stainless steel.

Polished Nickel (PN) - This is a smooth, rich, and highly polished finish, often found on high quality bathroom fixtures. Polished nickel has a warmer appearance when compared to chrome plating.